How to Put Sony SRS XG500 in Pairing Mode

The -Bluetooth Pairing- button on the Sony SRS XG500 wireless speaker.

To pair your SRS XG500 Sony Boombox speaker with a source device for the first time, or to refresh old connection info in that device, you have to know how to start up pairing mode on this speaker. Why? Because in this mode, the speaker broadcasts its name and currently valid connection info over Bluetooth. Then this lets source Bluetooth devices pair with it. So in this post, we show you how to put the Sony SRS XG500 BT speaker into pairing mode, so you can easily link it with phones, tablets, computers, and smart speakers, and stream music from those devices onto this speaker.

How to Put Sony SRS XG500 in Pairing Mode: Step by Step

1. Turn ON the Speaker

Firstly, Turn on the speaker by rapidly pressing its Power button.

E.g. See this button, that we point out with the green arrow, in the next picture.

The -Power- button on the Sony SRS XG500 BT speaker.

The speaker then comes ON.

The green glowing -Power- lamp.

2. Press and Hold the Pairing Button for a Quarter Second

Secondly, pairing mode allows you to see your XG500 on your source Bluetooth device. So, activate pairing mode by pressing and releasing the Pairing button.

The -Pairing- button.

When you press this Pairing button, the speaker says in a female voice, “Bluetooth pairing.” Plus, the status lamp begins blinking blue, in a pulse-pulse-pause-pulse-pulse-pause pattern.

The blinking Bluetooth lamp on the Sony SRS XG 500.

3. Done with How to Put Sony SRS XG500 in Pairing Mode

Nearby Bluetooth source devices can then discover and connect to the speaker.

The Sony SRS XG500 boombox showing as Discovered on an iPad.

Lastly, while the BT Status lamp is flashing, you should see the XG500 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as we see in the last picture above. Thus if you see that, then this means that the speaker is indeed running in pairing mode.