Categories: Bluetooth SpeakersSmart Speakers

How to Connect Sony SRS XG300 to Alexa

An Echo Dot 4 smart speaker beside the Sony SRS XG300 boombox speaker.

This post shows how to connect the Sony SRS XG300 boombox Bluetooth speaker to Alexa smart speakers. Since this pairing happens between the Sony and Echo devices directly, you need not turn Bluetooth on in the mobile device you’re using to set up this connection.

How to Connect Sony SRS XG300 to Alexa: Step by Step

With your Sony SRS XG300 switched OFF (status lamp is dark), run through this routine to connect it to your Alexa Echo, Show, Studio, Input, and Dot models. We use an iPad Air tablet to set this up.

1. Find the Alexa app on your Mobile Device

We found the app on the iPad Air as shown in the next shot. In this exercise, the app is in a custom folder we set up, called Smart Speakers.

The Alexa app icon on iPadOS.

2. Run the Alexa App

The app displays its Home screen as we see in the next screenshot.

The -More- option on the Alexa app -Home- screen.

3. Tap the More Item to Continue with How to Connect Sony SRS XG300 to Alexa

Find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.

This brings up the Alexa app’s main menu.

The main menu -Settings- item.

4. Tap the Settings Option on the Main Menu

The Settings option is pointed at by the green arrow in the last photo.

This brings up the Settings screen.

The -Device Settings- option on the -Settings- screen.

5. Tap the Device Settings Option

Touching Device Settings brings up the All Devices page.

The Echo Dot 4 appearing on the -All Devices- screen in the Alexa app.

From here, choose which Echo device you wish to pair with your Sony SRS XG300 speaker.

6. Tap the Alexa Device you Wish to Connect

This takes you to the device-specific settings screen for the speaker you chose.

In this demo, we’re pairing from our Thomas’s 2nd Echo Dot 4 speaker to our XG300, and so, its device specific settings screen looks as follows.

The -Connect a Device- item on the Echo Dot 4 -Settings- screen.

7. Tap the Connect a Device Item

Find the Connect a Device option pointed at by the green arrow in the last screenshot.

This brings up the Setup screen, as we show next.

The -Pair Bluetooth Device- screen.

At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this speaker will be the one that scans for BT devices.

Note that our Dot speaker found no devices so far. But it will in the next steps, when we turn on the Sony SRS XG300 and put it in pairing mode.

8. Power Up the Sony SRS XG300

Bring your speaker close to your Alexa device to pair, and power up that speaker by pressing and releasing the Power button.

The -Power- button on the Sony SRS-XG300 speaker.

This light should then start glowing green.

The -Power- lamp glowing green on the top of the XG300.

9. Place the BT Speaker into Pairing / Discovery Mode

Put your speaker into pairing mode by pressing and releasing the Pairing button.

The -Pairing- button.

When this discovery mode begins, the speaker announces, “Bluetooth pairing,” and the BT status lamp starts flashing blue in a pulse-pulse-pause, pulse-pulse-pause pattern.

The -Bluetooth Pairing- lamp flashing blue on the Sony SRS XG300.

10. Find the Sony SRS XG300 on the Alexa App SETUP Page

When you put the speaker into discovery mode, it should then appear in the Alexa app, on the Pair Bluetooth Device… page, as we see next.

The Sony SRS XG300 showing as Discovered on the -Setup- page in the Alexa app.

Note that if your boombox does not show up on this page at this point, then try moving it very close to the Alexa speaker, closing and restarting the Alexa app, and then repeating steps 3 through 7 along with step 9 above. We usually find that this gets the speaker to appear here as it should.

11. Find your Sony SRS XG300 on the Discovered Devices List

See the last screenshot above. Our test speaker is there.

12. Finally, Pair your Alexa with your Sony SRS XG300 Boombox

Pair to the speaker by tapping its corresponding entry on the Pair Bluetooth Device… screen, we see in the last screenshot above.

Your Alexa speaker then pairs with the boombox.

The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.

The Sony SRS-XG300 showing as Connected to an Echo Dot 4 in the app.

Note that our boombox now shows as connected. Also, the Sony speaker makes the Speaker Paired sound (the ding-dong sequence), and it announces, “Bluetooth connected.”

This speaker is now connected with your Alexa smart speaker. Its Pairing light glows solid blue to signal that successful pairing is in effect.

13. Done with How to Connect Sony SRS XG300 to Alexa !

We can now ask Alexa to play music or news, and those programs will come out of the Sony SRS XG300 mini boombox. Be sure though, to speak to the Echo speaker when making requests, and not the BT speaker. Even though the Sony SRS XG300 is now joined with Alexa, the Echo is still the speaker that hears your voice commands through its internal far field microphones.