How to Put Sony SRS XG300 in Pairing Mode

To pair your SRS XG300 Sony Bluetooth Boombox speaker with a source device for the first time, or to refresh old connection info in that device, you have to know how to start up pairing mode on this speaker. Why? Because in this mode, the speaker broadcasts its name and currently valid connection info over Bluetooth. Then this lets source Bluetooth devices pair with it. So in this post, we show you how to put the Sony SRS XG300 BT speaker into pairing mode, so you can easily link it with phones, tablets, computers, and smart speakers, and stream music from those devices onto this speaker.

How to Put Sony SRS XG300 in Pairing Mode: Step by Step

1. Turn On the XG300

Firstly, Turn on the speaker by rapidly pressing its Power button.

E.g. See this button, that we point out with the pink arrow, in the next picture. It’s the first button on the left as you face the speaker front and look down at it from the top.

Picture of the -Power- button on the Sony SRS XG300 speaker. — The -Power- button on the Sony SRS XG300 Bluetooth speaker.

The unit then comes on with a cool startup sound, and the Power lamp starts glowing.

Picture of the -Power- LED glowing green — The -Power- LED glowing green

2. Press and Hold the Pairing Button for a Quarter Second

Secondly, pairing mode allows you to see your XG300 on your source Bluetooth device. So, activate pairing mode by pressing and releasing the Pairing button.

Picture of the -Pairing- button, just to right of the -Power- switch. — The -Pairing- button, just to right of the -Power- switch.

When you press this Pairing button, the speaker says in a female voice, “Bluetooth pairing.” Plus, the Pairing lamp begins blinking blue, in a pulse-pulse-pause-pulse-pulse-pause pattern. We point to this light in the next picture. It’s just above the Pairing button.

Picture of the -Bluetooth Pairing- light flashing blue. — The -Bluetooth Pairing- light flashing blue.

3. Done with How to Put Sony SRS XG300 in Pairing Mode

Screenshot of the Sony SRS XG300 showing as Discovered on an iPadOS tablet. — The Sony SRS XG300 showing as Discovered on an iPadOS tablet.

Lastly, while the BT Status lamp is flashing, you should see the XG300 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as we see in the last picture above. Thus if you see that, then this means that the speaker is indeed running in pairing mode.

How to Put Sony SRS XG300 in Pairing Mode